Monday, September 8, 2008

Blitzy's seat pan

Photo-0118 Today I took the Blitzy to Salmeen's shop in Shuwaikh, the task is to manufacture a seat pan to hide Blitzy's wiring. The task is tedious, first off the designated area need to be shielded with tape. The bike had to be covered to protect from any resins drips. The fiberglass mesh was laid, then resins mixture was applied thoroughly making sure all the air in between the mesh was forced out. Second layer was cut and applied and the third using the same procedure. After 2 hours the pan has taken a rough form, its a matter of waiting for the resins mixture to dry, hoping it will be done by tomorrow.

No comments: